Full specification

Model Polaris BPM  
   
Capacity 10-100KVA/9-90KW / 10-200KVA/9-180KW / 25-250KVA/22.5-225KW / 30-300KVA/27-270KW
   
input  
Voltage 208-478Vac
frequency range 40Hz-70Hz
phase 3 Phase4 Wiresa nd Ground
thdi ≤ 3% (100% nonlinear load)
power factor ≥ 0.99
input generator Support
   
output  
Voltage 380/400/415 Vac
Regulation of voltage ± 2%
frequency ±1%, ±2%, ±4%, ±So/o, ±10% of the rated frequency (optiona l)
frequency (battery mode) (50/60±0.2%) Hz
Crest Factor 3:1
Waveform Pure Sinewave
THD ≤ 2% with linear load / ≤ 5% with non linear load
   
battery  
Charging current (UPS frame) 30A Max. / 60A Max. / 100A Max. (charge current can be set according to battery capacity installed)
Charging current (HPM Module) 6A Max. / 10A Max. (charge current can be set according to battery capacity installed)
   
protection  
Short Circuit Hold Whole System
Overheat Une Mode: Switch to By pass; Backup Mode: Shut down UPS immediately
Battery Low Alarm and Switch off
Self-diagnostics Upon Power On and Software Control
EPO (optional) Shut down UPS immediately
Battery Advanced Battery Management
Noise Suppression Complies with EN62040-2
   
alarms  
Audible & Visual Line Failure, Battery l ow, Overload, System Fault
   
display  
Status LED & LCD Une Mode, Eco Mode, By pass Mode, Battery Low, Battery Bad, Overload & UPS Fault
Reading On the LCD Input Vol ta ge, Input Frequency, Output Vol ta ge, Output Frequency, l oad Percentage, Battery Vol ta ge & lnnerT emperature
   
environment  
Operating Temperature OºC ~ 40ºC
Storage Temperature -25ºC ~ 55ºC
Humidity 0~95% non condensing
Altitude < 1500m
Noise < 60dB (at 1 meter)