| Model TX-A 10 3:3, TX-A 20 3:3 |
|
| |
|
| Capacity |
10000VA / 9900W |
| |
|
| input |
|
| NOMINAL VOLTAGE |
380/400/415VAC, (3PH+N+PE) |
| OPERATING VOLTAGE RANGE |
208-478VAC |
| OPERATING FREQUENCY RANGE |
45-55HZ AT 50HZ / 54 -66 HZ AT 60HZ (AUTO SENSING) / 40-70 HZ |
| POWER FACTOR |
≥0.99 |
| BYPASS VOLTAGE RANGE |
380VAC MAX VOLTAGE_+25% (OPTIONAL +10%, +15%, +20%) 400 VAC MAX VOLTAGE: +20% (OPTIONAL +10%, +15%) 415 VAC MAX VOLTAGE: +15% (OPTIONAL +10%) MIN VOLTAGE: -45% (OPTIONAL -20%, -30%) |
| BYPASS FREQUENCY RANGE |
FREQUENCY SYNCHRONIZE TRACING RANGE: ±10% |
| ECO RANGE |
SAME AS BYPASS |
| HARMONIC DISTORTION (THDI) |
≤3% (100% NON-LINEAR LOAD) |
| |
|
| output |
|
| OUTPUT VOLTAGE |
380/400/415 VAC (3PH+N+PE) |
| POWER FACTOR |
0.9 |
| VOLTAGE REGULATION |
±1% |
| FREQUENCY LINE MODE |
±1%/±2%/±4%/±5%/±10% OF THE RATED FREQUENCY (OPTIONAL) |
| FREQUENCY BAT MODE |
50/60 (±0,1) HZ |
| CREST FACTOR |
3:1 |
| HARMONIC DISTORTION (THD) |
≥2% WITH LINEAR LOAD |
| EFFICIENCY |
93,5% / 94,5% |
| |
|
| SYSTEM FEATURES |
|
| TRANSFER TIME |
UTILITY TO BATTERY: OMS; UTILITY TO BYPASS: OMS |
| OVERLOAD |
LOAD:s110%: LAST 60MIN, s1 25%: LAST lOMIN, s1 50%: LAST 1 MIN, ??,so% CHANGE TO BYPASS |
| SHORT CIRCUIT |
HOLD WHOLE SYETEM |
| COMMUNICATION |
USB, RS232, RS485 , PARALLEL PORT, COUPLER DRY CONTACT, INTELLIGENT SLOT, SNMP CARO (OPTIONAL), RELAY CARO (OPTIONAL) LBS PORT (ONLY 60-SOK) |
| |
|
| ENVIRONMENTAL |
|
| OPERATING TEMPERATURE |
0-40 |
| STORAGE TEMPERATURE |
-25°C - 55°C (NO BATTERY) |
| HUMIDITY RANGE |
0-95% (NON CONDENSING) |
| ALTITUDE |
lS00M, LOWER THE RATEO POWER USE |
| NOISE LEVEL |
<55DB / <58DB / <63DB |
| |
|
| PHYSICAL |
|
| DIMENSION DXWXH (MM) |
828X2S0X8S8 / 828X360X868 |
| NET WEIGHT (KG) |
115/57 - 170/63 - 171/64 - 223/71 - 73 - 118 - 122 |
| |
|
| STANDARDS |
|
| SAFETY |
IEC/EN62040-1, IEC/EN60950-1 |
| EMC |
IEC/EN62040-2, IEC61000-4-2, IEC61000-4-3, IEC61000-4-4, IEC61000-4-5, IEC61000-4-6, IEC61000-4-8 |
| |
|
